Latest News
Contact Us
- Building 21, Cuigang Industrial Park, Fuyong Street, Baoan District, Shenzhen, 518000, China
- cherry@hengtaijd.com
- +8613715330926
-
12/Mar
2024
Application Of Resin Parts in The Field Of Medical Analytical Devices
Due to its ability to withstand repeated high-pressure sterilization, PEEK can be used in the manufacturing of endoscopic components, dental descalers, and more in medical devic...
-
19/Feb
2024
Application Of Resin Parts in IT Manufacturing Industry
The semiconductor manufacturing and electronics industry are expected to become another growth point for PEEK resin applications. In the semiconductor industry, in order to achi...
-
18/Feb
2024
The Main Application Of Resin Parts in The Field Of Transportation Machinery ...
The growth of PEEK resin in the European market is particularly rapid in the automotive parts product market, especially in the use of PEEK plastic as a manufacturing material t...
-
17/Feb
2024
Main Characteristics Of Resin Parts
1: · Corrosion resistance and anti-aging 2: solubility resistance; 3: High temperature, high frequency, and high voltage electrical performance condition 4: both toughnes...
-
16/Feb
2024
What To Do If The Pitch Of The Turned Parts Is Incorrect
Fault analysis and solutions: 1 The reason for the incorrect thread length is due to improper matching of the hanging wheel or incorrect position of the feed box handle. The pos...
-
15/Feb
2024
What To Do If There Is A Situation Of Disorderly Deduction Of Turning Parts
Fault analysis and solution: The reason is that when the screw rotates once, the workpiece does not rotate by an integer and instead causes it. When the ratio of the pitch of th...
-
14/Feb
2024
What To Do If There Is Tool Gnawing On The Turning Parts
Fault analysis and solution: The reason is that the turning tool is installed too high or too low, the workpiece is not firmly clamped, or the turning tool is worn excessively. ...
-
13/Feb
2024
Fault And Solution Of Turning Parts
Common faults and solutions when turning threads: The thread is formed on the surface of a cylindrical workpiece along a spiral line, with continuous protrusions and grooves of ...
-
12/Feb
2024
Post Machining Steps For Turning Parts
1. The raw materials to be processed, finished products, semi-finished products, and waste materials must be stacked in designated locations, and all tools and cutting tools mus...
-
11/Feb
2024
Processing Steps in Turning Parts Operation
1. Tools, clamps, cutting tools, and workpieces must be firmly clamped. All types of machine tools should be idling at low speed after driving, and only after everything is norm...
-
10/Feb
2024
Pre Machining Steps For Turning Parts
Before starting work, strictly use protective equipment according to regulations, tie the cuffs, and do not wear scarves or gloves. Female workers should tie their hair inside t...
-
09/Feb
2024
Turning Parts - Workpiece
Although 45HRC hardness is the starting point for hard turning, hard turning is often performed on workpieces with a hardness above 60HRC. Hard turning materials usually include...